Article ID : 00260532 / Last Modified : 04/05/2021

What ISO/GAIN ranges can be set in Custom mode?

    IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

    ISO/GAIN can be set within the following ranges in Custom mode.

     ISO Setting (0.3 EV Step)GAIN Setting (1dB Step)

    Target Display

    SDR (BT.709)HDR (HLG)SDR/HDR
    LOOK

    Preset:
    S-Cinetone / Standard / Still / ITU709

    User (s-log3)AllAll

    Base Sensitivity

    HighLowHighLowHighLowHigh/Low
    Settable range-------3 dB
    500032012800800128008000 dB
    ------1 dB
    64004001600010001600010002 dB
    ------3 dB
    80005002000012502000012504 dB
    ------5 dB
    100006402500016002500016006 dB
    ------7 dB
    128008003200020003200020008 dB
    ------9 dB
    16000100040000250040000250010 dB
    ------11 dB
    20000125050000320050000320012 dB
    ------13 dB
    25000160064000400064000400014 dB
    ------15 dB
    32000200080000500080000500016 dB
    ------17 dB
    4000025001024006400102400640018 dB
    ------19 dB
    5000032001280008000128000800020 dB
    ------21 dB
    640004000160000100001600001000022 dB
    ------23 dB
    800005000200000128002000001280024 dB
    ------25 dB
    1024006400256000160002560001600026 dB
    ------27 dB
    1280008000320000200003200002000028 dB
    ------29 dB
    16000010000409600256004096002560030 dB
    20000012800-----
    25600016000-----
    32000020000-----
    40960025600-----
    • When the GAIN setting is selected, the sensitivity can be reduced by -3 dB (0.5 EV) relative to the base sensitivity.
    • When the GAIN setting is selected, setting is possible in 1 dB increments, which enables a finer sensitivity setting compared to the ISO setting.
    • When the GAIN setting is selected, there is a range that cannot be set on the high sensitivity side. (When using the high sensitivity range, the setting must be made using ISO.)