My speaker makes an error noise and won't play music when I press the Push & Play button

An error noise may occur on your LSPX-S2 Wireless Glass Sound Speaker, and playback may not be possible due to network status or Spotify® settings and response conditions:

• The Spotify Connect function has never been used.
• The speaker isn't connected to Wi-Fi® network.
• The speaker uses the Speaker Add function.

Check if playback works after completing each step.

• Power reset the speaker.
  1. Turn off the speaker.
  2. Turn on the speaker again.
  3. At the bottom of the speaker, press the (Push & Play) button.
• Make sure the (Push & Play) indicator is on.
  • Press the BLUETOOTH/ PAIRING button.
    • If the (Push & Play) indicator is off, press the (Push & Play) button.
• Check the status of Spotify Connect using the Spotify app.
  • If it isn't set to playback on this unit, open Connectable Devices and select this unit again.
• Make sure that the tracks (artists, albums, etc.) registered to Favorite music with the (Push & Play) button aren't set to Don’t play in the Spotify app.
  • Cancel the Don’t play setting or register new tracks to Favorite music.