SONY® Monitor INF File (Windows XP 32bit/64bit...)

IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.

This information is for the following models:

About this download

SONY® Monitor INF File

To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
It is highly recommended to print out these instructions as a reference during the installation process.

Download the SDM-HS95.EXE file to a temporary or download directory (please note this directory for reference).
Go to the directory where the file was downloaded and double-click the SDM-HS95.EXE file to begin the installation.
At the "SDM-HS95 Information File" window, and select the directory to which the files are to be extracted and click OK.
NOTE: The monitor files can either be extracted to a directory on your computer hard drive or onto a floppy disk.
- To extract the files onto a floppy disk: Leave the A:\ entry, and put a floppy disk in the computer floppy disk drive.
- To extract the files to a directory on your computer hard drive: Click the Browse button. At the "Browse for Folder" window, navigate to the desired directory, and click OK.
  NOTE: Please wait as the files are extracted.
Go to the directory to which the files were extracted. A README-E.RTF file was extracted along with the INF files. This file contains the instructions to complete the monitor INF installation. Please follow the steps in the README-E.RTF file that match the operating system installed on your computer.
NOTE: The README-E.RTF file instructions may refer to the floppy drive (ex: A:\) as the source for the driver files. If the monitor INF files were extracted to a directory on the computer hard drive, be sure to substitute this directory for the A:\ when following the instructions.