Sony Support

Sony® Reader (PRS-600) System Update

    Applicable Models
    About this download
    System Requirements
    File Info
    Preparation
    Download & Install
    Questions & Answers

    IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.

    This information is for the following models:

    • PRS-600

    About this download

    Benefits and improvements

    This utility updates the PRS-600 firmware to version 1.0.01.08040 and resolves an issue where the PRS-600 cannot read data from a memory card.

    System Requirements

    Operating Systems

    • Windows Vista®
    • Windows Vista® 64-bit
    • Windows® 7
    • Windows® 7 64-bit
    • Windows® XP
    • Windows® XP MCE

    File Info

    File Name

    • PRS-600_Updater_1.0.01.08040_a.exe

    File Version

    • 1.0.01.08040

    File Size

    • 18.41 MB

    Release Date

    • 08-25-2009

    Before You Start

    Important Notes

    • WARNING: The Sony Reader must be fully charged before installing this update. Failure to fully charge the Reader before installing the firmware update may cause the Reader to be unresponsive or to require repair.
    • The software update process takes about 1 to 2 minutes.
    • During the installation of this file, be sure that you are logged in as the Administrator or as a user with Administrative rights.
    • To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
    • It is highly recommended to print out these instructions as a reference during the installation process.

    Download & Install

    Download and Installation Instructions

    1. WARNING: The Sony Reader must be fully charged before installing this update. Failure to fully charge the Reader before installing the firmware update may cause the Reader to be unresponsive or to require repair.
    2. To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
    3. Download the PRS-600_Updater_1.0.01.08040_a.exe file to a temporary or download directory (please note this directory for reference).
    4. Make sure that all memory cards have been removed from the Reader.
    5. Connect the Sony Reader to the computer with the supplied USB cable.
    6. If the eBook Library software starts, close eBook Library before continuing.
    7. Go to the directory where the file was downloaded and double-click the PRS-600_Updater_1.0.01.08040_a.exe file to begin the installation.

    WARNING: Do not disconnect the Sony Reader during the update process.
    • Follow the on-screen instructions to complete the installation.

    Note: The Sony Reader will automatically restart during the update process.
    • After the software update is complete, an Update Completed message is displayed.
    • Click the X to close the update utility.

    After the Sony Reader restarts, and the Reader displays an update complete message, the installation of the Sony Reader (PRS-600) Update is complete.

    Installation Verification (optional)

    1. On the Sony Reader, press and hold the Home button until the Home menu opens.
    2. At the "Home" menu, touch More then Settings.
    3. At the Settings menu, touch About.
    4. At the About screen, version 1.0.01.08040 should be displayed.
      Note: If the version is not 1.0.01.08040, please re-download the update, and then perform the software update again.

    Questions & Answers

    Possible Errors During the Update Process

    ERROR: Please first quit eBook Library and try again. is displayed.

    RESOLUTION:

    1. Close the eBook Library software.
    2. Click the X in the upper right hand corner to close the PRS-600 updater window.
    3. Disconnect the USB cable from the PRS-600.
    4. Start the update process again.


    ERROR: Update isn't complete. Please try again is displayed.

    RESOLUTION:

    1. Click the X in the upper right hand corner to close the PRS-600 updater window.
    2. Disconnect the USB cable from the PRS-600.
    3. Start the update process again.


    ERROR: The Update button in the PRS-600 Updater is not enabled even if the PRS-600 is connected to the computer.

    RESOLUTION:

    1. Click the X in the upper right hand corner to close the PRS-600 updater window.
    2. Disconnect the USB cable from the Reader.
    3. Press the Reset button on the Reader, and then press the Power button to restart the Reader.
    4. Start the update process again.