Sony Support

Management Engine Firmware Update (Windows 8 64bit)

WAIT - Read the Required Files section before downloading this file.

Required Downloads

Unless stated otherwise, the file listed below must be installed BEFORE the Management Engine Firmware Update (Windows 8 64bit) in order for it to work properly. If more than one Required file is listed, install them in the order presented on this page.

Applicable Models

IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.

This information is for the following models:

  • SVT11115FBS
  • SVT11115FDS
  • SVT11115FLS
  • SVT111190S
  • SVT13112FXS
  • SVT13113FXS
  • SVT13114GXS
  • SVT13115FBS
  • SVT13115FDS
  • SVT13115FLS
  • SVT13116FXS
  • SVT13118FXS
  • SVT131190S
  • SVT131190X
  • SVT1311CGX/S
  • SVT1311EFYS

About this download

Benefits and improvements

This utility will install the Management Engine Firmware Update.

System Requirements

Operating Systems

  • Windows® 8 64-bit

File Info

File Name

  • UNDOTH-80275646-0082.EXE

File Version

  • 8.0.3.1427

File Size

  • 3.05 MB

Release Date

Before You Start


Important Notes

  • During the installation of this file, be sure that you are logged in as the Administrator or as a user with Administrative rights.
  • To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
  • It is highly recommended that you print out these instructions for use as a reference during the installation process.

Download & Install


Download and Installation Instructions

  1. To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
  2. Download the UNDOTH-80275646-0082.EXE file to a temporary or download directory (please note this directory for reference).
  3. Go to the directory where the file was downloaded and double-click the UNDOTH-80275646-0082.EXE file to begin the installation.
  4. At the "User Account Control" screen, click "Yes".
  5. At the "Select Country" screen, select the country for this installation, and then click "Next".
  6. At the "ME Firmware Ver. 8.0.3.1427" screen, click "Next".
  7. At the "License Agreement" dialog, read the agreement, then, if you agree, click "I Agree" to continue with the installation.
  8. At the "ME Firmware Update successfully completed" dialog box, click "OK" to shutdown the computer.
  9. After the computer shuts down, wait for 60 seconds, then power on the computer.

After the computer restarts, the installation of the ME Firmware is complete.