IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.
This information is for the following models:
About this download
Benefits and improvementsSony has designed the BRAVIA® Televisions software update process to be customer friendly. This software update (version PKG1.510AAF) provides the following benefits:
Improvements over version 1.505AAF:
- Enables Transport Layer Security 1.0 (TLS1.0) to enhance security of Internet applications
- Improves reliability to the Secure Sockets Layer 3.0 (SSL3.0)
Benefits provided by previous updates and included in version PKG1.510AAF:
- Provides HDMI® 2.0 compatibility (Applies to 4K models only)
Supports 4K 60p (3840X2160p (50/59.94/60Hz) YCbCr 4:2:0 8bit, 4096X2160p (50/59.94/60Hz) YCbCr 4:2:0 8bit)
- Improved performance and stability of the Internet features
- System Software
- 90.57 MB
Before You Start
Download & Install
How to Check if You Need the Update
Please follow the steps below to check your television's software version to determine if it needs this software update:
Decide How to Get the Update
| There are two ways to obtain the software update: |
Download and Transfer the Update File to Your USB Storage Device
Update Verification (optional)
|Updating the Software|
The software update takes up to five minutes to complete. During the update process, the screen on your BRAVIA television will display progress information, or may be blank. This is normal. Please do not remove the USB storage device until the update is complete.
WARNING! Do not power off the TV or disconnect it from the AC power source during the upgrade process. Loss of power during the installation of the firmware upgrade may cause the TV to be unusable and require repair.
WARNING! Do not press any button, except as instructed, until the update is complete. Doing so may damage your TV and make it unusable and require service.
Unplug all USB devices from the two USB inputs on the TV before starting the firmware update.
Please follow the steps below to verify that the software was successfully updated: