Applicable Models

IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.

This information is for the following models:

  • KDL-40W607B
  • KDL-48W607B
  • KDL-50W807B
  • KDL-55W807B
  • KDL-55W957B
  • KDL-60W607B
  • KDL-60W857B
  • KDL-70W857B
  • XBR-55X857B
  • XBR-65X857B
  • XBR-65X907B
  • XBR-79X907B
  • XBR-85X957B

About this download

Benefits and improvements

This update is intended only for televisions sold in Colombia.

Sony has designed the BRAVIA® Televisions software update process to be customer friendly. This software update (version PKG3.003GAA) provides the following benefits:

  • Improves the general performance of the TV

Benefits provided by previous updates and included in version PKG3.003GAA.

System Requirements

Operating Systems

  • System Software

File Info

File Name

  • sony_tvupdate_2014_3003_gaa_auth.zip

File Version

  • PKG3.003GAA

File Size

  • 241.53 MB

Release Date

  • 02-10-2017

Before You Start


How to Check if You Need the Update

Please follow the steps below to check your television's software version to determine if it needs this software update:

  1. Power on the TV.
  2. On the TV remote control, press the HOME button to open the TV Home Menu.
  3. On the remote control, use the arrows Arrows to select Settings Settings Icon.
  4. Use the arrows to highlight the Help Help (question mark) Icon icon, and then press the OK OK button button on the remote control.
  5. Use the arrows to select Customer Support Customer Support, and then press the OK OK button button.
  6. At the Customer Support screen, select System Information, and then press the OK OK button button.
  7. If the software version displayed is PKG3.003GAA or higher, your TV does not need this update.
    Information Screen

Important Notes

  • WARNING: After performing this update, it is not possible to return to or install a previous version of the system software. By downloading and installing this update, you acknowledge that you understand this update cannot be reversed.
  • WARNING: Please follow the upgrade instructions carefully. Failure to follow the instructions may interrupt the upgrade process and may cause the TV to be unresponsive or require repair.
  • WARNING: Do not power off the TV or disconnect it from the AC power source during the upgrade process. Loss of power during the installation of the firmware upgrade may cause the TV to be unresponsive or require repair.
  • All user settings are retained during the firmware update.
  • It is normal for the TV set to restart during the update process. The TV set may take longer than usual to restart as it is installing the new firmware.
  • To download the update, a USB storage device, such as a Micro Vault® device, or something similar, is required to perform the update. Sony is aware that not all USB storage devices are compatible with our TVs. If you are using a USB device for playback of photos, music, or videos on your TV, the same USB device type should work for the update. If the software update is not successful after following the instructions, you may need to format your device to the FAT32 file system, or use a different device. View formatting instructions.
  • It is highly recommended that you print out these instructions for use as a reference during the installation process.

Download & Install


Download and Transfer the Update File to Your USB Storage Device

  1. Download the sony_tvupdate_2014_3001_gaa_auth.zip file to a temporary or download directory (please note this directory for reference) on your computer.
  2. Go to the directory where the file was downloaded and verify that the size of the sony_tvupdate_2014_3001_gaa_auth.zip file is 253,258,139 bytes.
    1. Right-click the sony_tvupdate_2014_3001_gaa_auth.zip file, and click Properties.
    2. On the sony_tvupdate_2014_3001_gaa_auth.zip Properties screen, verify that the Size: listed is 241 MB (253,258,139 bytes).
      Note: The Size on disk: listed may be different. That is normal.
    3. If the file size is different than the 253,258,139 bytes, please download the sony_tvupdate_2014_3001_gaa_auth.zip file again.
  3. Extract the update file from the sony_tvupdate_2014_3001_gaa_auth.zip file.
    • For Microsoft® Windows Vista®, Windows® 7, 8/8.1, or Windows® 10 operating system:
      1. Go to the directory where the file was downloaded and right-click the sony_tvupdate_2014_3001_gaa_auth.zip file, and then click Extract All.
        Note: For Windows 8/8.1, the default settings for Internet Explorer® will save the file in the Downloads folder. To locate the Downloads folder, click the Desktop tile from the Start screen and then locate the downloaded file using Windows Explorer.
      2. At the Extract Compressed (Zipped) Folders window, click Extract.
      3. A new folder will be created called sony_dtv0FA40A06A0A6_00003201.
    • For Windows® XP operating system:
      1. Go to the directory where the file was downloaded and right-click the sony_tvupdate_2014_3001_gaa_auth.zip file, and then click Extract All.
      2. At the Extraction Wizard dialog box, click Next.
      3. Click Next.
      4. Click Finish.
      5. A new folder will be created called sony_dtv0FA40A06A0A6_00003201.
    • For Apple® Mac OSX® operating systems:
      1. Go to the location where the file was downloaded and double-click the sony_tvupdate_2014_3001_gaa_auth.zip file.
      2. A new folder will be created called sony_dtv0FA40A06A0A6_00003201.
  4. Connect a compatible USB storage device to your computer.
    Note: A USB storage device, such as a Micro Vault® device, or something similar, is required to perform the update. Sony is aware that not all USB storage devices are compatible with our TVs. If you are using a USB device for playback of photos, music, or videos on your TV, the same USB device type should work for the update. If the software update is not successful after following the instructions, you may need to format your device to the FAT32 file system, or use a different device. View formatting instructions.
  5. Transfer the update folder to the USB storage device:
    • For Windows operating systems: Go to the directory where the folder was created, right-click the sony_dtv0FA40A06A0A6_00003201 folder and, from the menu, click Send To..., and then click the drive (EX: Removable Disk E:) that represents your USB device. The update folder will be copied onto your USB device.
    • For Mac OSX operating systems: Drag and drop the sony_dtv0FA40A06A0A6_00003201 folder to the root folder of the USB device.
    Note: The update will not be performed if the file is not copied to the root directory of the USB device or if the name of the file is modified.
  6. Remove the USB device from your computer, and continue to the next section.

Updating the Software

The software update takes up to five minutes to complete. During the update process, the screen on your BRAVIA television will display progress information, or may be blank. This is normal. Please do not remove the USB storage device until the update is complete.

WARNING: Do not power off the TV or disconnect it from the AC power source during the upgrade process. Loss of power during the installation of the firmware upgrade may cause the TV to be unusable and require repair.

WARNING: Do not press any button, except as instructed, until the update is complete. Doing so may damage your TV and make it unusable and require service.

Unplug all USB devices from the two USB inputs on the TV before starting the firmware update.

  1. Power on the TV.
  2. Make sure no other USB devices are connected to the TV.
  3. Insert the USB storage device into the USB port located on the side of the TV.
    Note: The USB storage device can only be inserted into the USB port slot one way.
  4. Once the USB storage device has been detected, a series of different messages will appear on the TV set. Please follow the on screen instructions.
    WARNING: Do not turn off the TV or disconnect it from the power supply during the update process. Doing so may damage your TV and make it unusable or require service.
  5. When the file is finished copying from the USB storage device, the update process will begin and the POWER indicator on the TV will begin flashing white with an update Update Icon icon is displayed on the screen under updating. After several minutes, the TV will turn off and then turn back on to complete the update.
  6. Please wait until a message appears indicating The software update is complete.
    WARNING: During the firmware installation process, do not remove the USB device, turn off the TV, or disconnect the TV from the power supply.
  7. Remove the USB device from the TV, and then press the OK OK button button on the remote control.
  8. The update process is now complete and you may delete the update files from the USB device, or reformat the USB device.
    Note: If either message An error occurred during the software update or Software cannot be updated using this USB device is displayed on the TV screen, please proceed to the following procedure for a possible solution:
    1. Verify your USB device is in good working order and perform the Download and Transfer process again.
    2. Press the POWER button on the TV to power off the TV.
    3. Press the POWER button on the TV again to power on the TV.
    4. Perform the Updating the Software process again.
      Note: If the message No newer version of the TV software was found is displayed on the TV screen, your TV already has the newer firmware installed.

Update Verification (optional)

Please follow the steps below to verify that the software was successfully updated:

  1. Power on the TV.
  2. On the TV remote control, press the HOME button to open the TV Home Menu.
  3. On the remote control, use the arrows Arrows to select Settings Settings Icon.
  4. Use the arrows to highlight the Help (question mark) Help (question mark) Icon icon, and then press the OK OK button button on the remote control.
  5. Use the arrows to select Customer Support Customer Support, and then press the OK OK button button.
  6. At the Customer Support screen, select System Information, and then press the OK OK button button.
  7. Check the Software Version displayed. If your software version is PKG3.003GAA, the update was successful.
    Information Screen