Check the status of the Bluetooth indicator on your speaker

Follow these instructions and then check the status of the Bluetooth® indicator:

1. Delete the Bluetooth device information of your playback device.
   Note: If the speaker isn’t listed in the Bluetooth device information on the playback device, proceed to the next step.

2. Initialize the speaker.
   Notes:

   • WARNING! Performing this step will reset all settings in the speaker and deletes all pairing and device information.

   • If model-specific information is required to complete this step, check your manual. Manuals are posted on your model support page.
   • The image used is for the SRS-XB22 wireless speaker.

   1. Turn on the speaker.
   2. Press and hold the - (volume) and (power)/ PAIRING buttons simultaneously for more than five seconds.

      

      • The speaker will turn off when the initialization is complete.
3. Turn on the speaker.

What's the status of the Bluetooth indicator?

• The Bluetooth indicator flashes slowly or lights up.
  • Initialization isn't possible and the power is on. Initialize the speaker again.
• The Bluetooth indicator flashes quickly (three times a second).

Return to Main Menu